TARRAGO Paint Sneakers, 125 ml Painting Sneakers, Custom Sneakers

Description

M
a
k
e
y
o
u
r
s
n
e
a
k
e
r
s
u
n
i
q
u
e!
Dye for personalization, drawing individual drawings, repainting or restoring the damaged surface of sneakers.
Does not wash off with water, does not crack.
Suitable for natural smooth leather and synthetic leather.
Do not use for suede and nubuck!
Application.
1. Clean shoes with TARRAGO Sneakers Cleaner sneaker cleaner, brushes and velvet ribbon. For a better staining result, you can use a cleaner before painting. Tarrago Conditioner
2. Stir the contents of the bottle with a brush until you get a uniform color.
3. To repaint large surfaces, use a sponge. Apply a small amount of paint to the sponge and gently brush the surface with light circular motions.
To draw small parts and personalize, use brushes of the required diameter.
For soft transitions and halftones, use an airbrush.
Use the product very carefully. It is better to apply several thin layers of paint than one very thick layer. when drying it can crack.
After the first coat of paint has dried (3-5 minutes), apply a second coat, if necessary, to create the desired color.
To speed up the drying process between layers, you can use a hairdryer, without bringing it too close to the skin (at least 30 cm). For optimal results, dry the product within 12 hours. As soon as the painting process is complete, wash the sponge, brush or airbrush with water so that you can use it again.
The required color can be achieved by mixing between different dyes for sneakers. Use the supplied dosing cap for this.
Examples:
Orange: 2 parts yellow + 1 part magenta
Purple: 2 parts purple + 1 part blue
Green: 2 parts blue + 1 part yellow
To fix the color and make it more resistant, you can apply a glossy finish for sneakers TARRAGO Sneakers Gloss Maker or a Matte finish for sneakers TARRAGO Sneakers Matt Maker. This will make the surface glossy or matte according to your wishes.