10 pcs SN75176B SN75176BP 75176 Differential Bus Transceivers DIP8 Ships from US

Description

10 pieces SN75176B SN75176BP 75176 Differential Bus Transceivers DIP-8
Supply Voltage Range: 4.5V to 5.5V
Logic Case Style: DIP
No. of Pins: 8
Operating Temperature Range: 0°C to +70°C
Driver Case Style: DIP
Filter Terminals: DIP
Leaded Process Compatible: Yes
Typically used convert a TTL/CMOS serial signal to RS485, for an example using Arduinos google
"
SN75176 RS485 Communications between two Arduinos"
Features for the SN75176B
Bidirectional transceivers
Meet or exceed the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27
Designed for multipoint transmission on long bus lines in noisy environments
3-State driver and receiver outputs
Individual driver and receiver enables
Wide positive and negative input/output bus voltage ranges
± 60-mA Maximum driver output capability
Thermal shutdown protection
Driver positive and negative current limiting
12-kΩ Minimum Receiver Input Impedance
± 200-mV Receiver input sensitivity
50-mV Typical receiver input hysteresis
Operate from single 5-V supply
Description for the SN75176B
The SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
The SN75176B devices combine a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus when the driver is disabled or V
CC
= 0. These ports feature wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.
The driver is designed for up to 60 mA of sink or source current. The driver features positive and negative current limiting and thermal shutdown for protection from line-fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The receiver features a minimum input impedance of 12 kΩ, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV.