1/5/10Pcs Philips 74HC574D Octal D-type Flip-Flop Positive Edge-Trigger 3-State

Description

1/5/10Pcs Philips 74HC574D Octal D-type Flip-Flop Positive Edge-Trigger 3-State
The 74HC574D is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
SPECIFICATIONS
Manufacturer: Philips / Nexperia
Part Number: 74HC574D
Product Category: Flip Flops
Number of Circuits: 8
Logic Family: 74HC
Logic Type: CMOS
Polarity: Non-Inverting
Input Type: Single-Ended
Output Type: Single-Ended
Propagation Delay Time: 150 ns
High Level Output Current: - 7.8 mA
Low Level Output Current: 7.8 mA
Supply Voltage - Min: 2 V
Supply Voltage - Max: 6 V
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 125 C
Mounting Style: SMD/SMT
Package / Case: SOT-163
Function: D-Type Bus Interface
Height: 2.45 mm
Length: 13 mm
Quiescent Current: 8 uA
Width: 7.6 mm
Brand:     Nexperia
Number of Channels: 8
Number of Input Lines: 8
Number of Output Lines: 8
Subcategory: Logic ICs